tubesRit.com


Home :: Login
Album list :: Last uploads :: Last comments :: Most viewed :: Top rated :: My Favorites :: Search

Search results - "tin"
20090221_0252.JPG
Bias Supply Build74 viewsForming and insulating the leads on the rectifier and resister ahead of time makes for an easier install.
20090221_0254.jpg
Bias Supply Build71 viewsI started by mounting the resister between T2 and T6 tabs.
20090223_0288.JPG
RCA Input Jack33 viewsNote that the jack mounting plate consists of two pieces. The flat cover and jack mount plate. I generally use the RCA jacks from Radio Shack. Look closely at the jacks and you will notice a bit of a lip at their base. Because of this lip, one must rim out the hole slightly on the flat cover in order to fit.
20090610_0353.JPG
RT-707 Plays Holst !30 viewsMy first open reel and the first played through my old Otari by me was a Barclay Crocker copy of Holst "The Planets". So I just thought it fitting to fire up the Pioneer with the same reel. :)
20090802_0408.JPG
DIY TT Shelf40 viewsFirst, I built the base that mounts to the wall out of a couple pieces of 3/4 inch plywood and two pieces of 2x4. Second, used some 2x2 hardwood for the back posts. I mounted the shelving brackets before leveling and mounting the 2x2's to the base support. Note the neat cable raceway, now I can keep the interconnects and speaker cables away from high voltage.
300B02Tools.jpg
Tools I used302 viewsHere are some of the tools I used for cutting the top plate
300B03Darwing.jpg
Top Plate layout308 viewsI used Visio to creat the layout of the top plate. I then printed the drawing on 11x17 which was just about the size of the top plate. I simply taped the paper to the top place and proceded to center punch each place where I would be cutting.
300B05Cutting.jpg
Cutting426 viewsCutting big hole with adjustable hole cutter.
500COPT.jpg
Up Close of OPTs123 viewsHere is a shot of the OPTs of my 500C. It's still sitting on the bench waiting its turn :(
AT1009_Mounting_Template2.jpg
Audio Technica AT1009 Mounting Template77 views
Marcel_Clovis_DHT_PP45.pdf
Marcel & Clovis457 viewsHere is the Valve artical on the Marcel & Clovis PP45 amp. If I should not be posting this PDF, then please contact me via AudioAsylum under the ID of Ciscokid and I will remove this artical from my site.
TinWhiskers.jpg
Tin Whiskers81 views